Slot Cars Adelaide
Shopping Basket
Your Basket is Empty
Quantity:
Subtotal
Taxes
Delivery
Total
There was an error with PayPalClick here to try again

- Home
- FPR CALENDAR 2019
- FPR RACING RULES
- Tyre Preparation - 2019
- Truspeed controllers
- Technical Information
- Handicap Racing
- Adelaide F1 Car Builds
- TRACK PHOTOS
- FPR Lap Counting
- 1/24 Vintage Racing
- FPR Enduro Races
- FPR Major Events
- Tire Information
- Controllers
- Difalco 304 Assitance Notes
- Home Built Gallery
- Car Building
- Lexan F1 wing supports
- Scalextric V8 Super Car
- FPR Classic Touring Cars
- 1/24 BRM GT Information
- MJK FJ Holden KIt Tips
- Group C Slot.it Tuning
- Carrtrix GP - Tuning
- SCC Front axle kit
- 1/32 GP Cars Front Axle
- SCX - Fitting Pioneer
- MJK Chassis Alter
- Small Touring Cars - Plafit
- Scalextric F1 FPR Set Up
- Speedway Midget
- Steves Bars & Wings
- Sprint Car wing - Lexan
- General Car set up & tuning
- Contact & Links
- Photo Gallery
- Adelaide Slot Car History
- Tyre Preparation
- Truspeed MT 1 controller
- test page
- Home
- FPR CALENDAR 2019
- FPR RACING RULES
- Tyre Preparation - 2019
- Truspeed controllers
- Technical Information
- Handicap Racing
- Adelaide F1 Car Builds
- TRACK PHOTOS
- FPR Lap Counting
- 1/24 Vintage Racing
- FPR Enduro Races
- FPR Major Events
- Tire Information
- Controllers
- Difalco 304 Assitance Notes
- Home Built Gallery
- Car Building
- Lexan F1 wing supports
- Scalextric V8 Super Car
- FPR Classic Touring Cars
- 1/24 BRM GT Information
- MJK FJ Holden KIt Tips
- Group C Slot.it Tuning
- Carrtrix GP - Tuning
- SCC Front axle kit
- 1/32 GP Cars Front Axle
- SCX - Fitting Pioneer
- MJK Chassis Alter
- Small Touring Cars - Plafit
- Scalextric F1 FPR Set Up
- Speedway Midget
- Steves Bars & Wings
- Sprint Car wing - Lexan
- General Car set up & tuning
- Contact & Links
- Photo Gallery
- Adelaide Slot Car History
- Tyre Preparation
- Truspeed MT 1 controller
- test page
Photo Gallery
Lincoln Park 4 Lane
Removing Steps on Joints
« Back to Album | Photo 29 of 35 | Previous | Next |
On testing the track the slight difference in Hieght at the joints proved a problem on some lanes. I used the corner of a steel rule to locate any steps from both directions of travel. I used a body filler file to level the joint while rechecking with the steel rule corner. I used the small triangle sander to finish of. Care must be taken not to damage the braid . The process took about a half hour on each of the joints needing correction.
Once complete I masked the braid and gave the repaired area it a coat of water mixed Cabothane.
Then 2 coats of Ferrodor . Finally coated with oil mixed flat Cabothane.
Posted on 15 August, 2011 | Full Size| |
Post a Comment
Oops!
The words you entered did not match the given text. Please try again.
99 Comments
Loading...

Reply
cialis generico 5 mg prezzo in farmacia
13:49 on 30 April, 2022
I adore the variations.
buy cialis
comprar cialis 5 mg
citax 5 mg precio
buy cialis
avanafil prezzo
buy cialis
comprar cialis 5 mg
citax 5 mg precio
buy cialis
avanafil prezzo

Reply
AAdcttb
15:27 on 14 April, 2022
https://bitbin.it/fbuU2Haf/
https://bitbin.it/voVxZJiZ/
https://bitbin.it/MH3xCws9/
https://bitbin.it/UnoUqQ31/
https://bitbin.it/sCiIPjhb/
https://bitbin.it/3KcUUE67/
https://bitbin.it/JJJjHBlZ/
https://bitbin.it/MyJK2d5L/
https://bitbin.it/yNb05xst/
https://bitbin.it/aT2Ej8jM/
https://bitbin.it/RmJftOPA/
https://bitbin.it/1d6yYb1S/
https://bitbin.it/l3qZoF2L/
https://bitbin.it/Oc8ml3pY/
https://bitbin.it/MvSp2grk/
https://bitbin.it/bci9yeAJ/
https://bitbin.it/MrwM8oM5/
https://bitbin.it/BJHpT8rd/
https://bitbin.it/YpTJZd3K/
https://bitbin.it/V8w023iY/
https://bitbin.it/2QwQSt8u/
https://bitbin.it/tF6QDTer/
https://bitbin.it/voVxZJiZ/
https://bitbin.it/MH3xCws9/
https://bitbin.it/UnoUqQ31/
https://bitbin.it/sCiIPjhb/
https://bitbin.it/3KcUUE67/
https://bitbin.it/JJJjHBlZ/
https://bitbin.it/MyJK2d5L/
https://bitbin.it/yNb05xst/
https://bitbin.it/aT2Ej8jM/
https://bitbin.it/RmJftOPA/
https://bitbin.it/1d6yYb1S/
https://bitbin.it/l3qZoF2L/
https://bitbin.it/Oc8ml3pY/
https://bitbin.it/MvSp2grk/
https://bitbin.it/bci9yeAJ/
https://bitbin.it/MrwM8oM5/
https://bitbin.it/BJHpT8rd/
https://bitbin.it/YpTJZd3K/
https://bitbin.it/V8w023iY/
https://bitbin.it/2QwQSt8u/
https://bitbin.it/tF6QDTer/

Reply
AAmicwy
0:36 on 3 March, 2022
??????? ???? ??????? ????? ? ??????? ???? ??????????? ????? ? ??????? 2022 ???? ??????????? ?????
/
Oops!
Oops, you forgot something.